Extendable Leg for Original Bed Installation Guide

Quick answer

Installing the Extendable Leg for Original Bed requires verifying compatibility, aligning the leg with the bed frame, and securing it firmly. Follow the steps below to avoid common alignment or stability issues.

Installation steps

1. Check compatibility: Confirm that your Original Bed model accepts the Extendable Leg. The leg is intended as a replacement or accessory for select models; verify before proceeding. Ordering the wrong part is a common mistake—check your model number or contact support if unsure.
2. Position the leg: Align the extendable leg with the mounting point on the bed frame. Slide it into place so the holes line up evenly. Forcing the leg into a misaligned position can strip threads or damage the frame.
3. Secure the leg: Insert the provided bolts or screws and tighten them firmly with a suitable tool. Do not overtighten—snug is sufficient. Overtightening can crack the leg or frame; use hand-tight plus a quarter turn as a rule.
4. Test for stability: Gently rock the reformer to ensure the leg is stable and the bed sits level. If it wobbles, recheck alignment and tightness. A wobbly leg indicates incorrect installation or an incompatible part—do not use until fixed.

Product facts

• Extendable Leg for Original Bed: Genuine replacement leg for Original Bed models, designed to maintain proper height and stability. Using the correct part ensures your reformer stays level and safe during exercises.